Product ID:SCOTCH-WELD (R) EPOXY ADHESIVE 2158B
MSDS Date:11/04/1985
FSC:8040
NIIN:00-430-8261
MSDS Number: BDYQT

3M CO. ADHESIVES COATINGS AND SEALERS DIV.

3M CENTER
ST. PAUL, MN 55144-1000
US

Emergency Phone: 612-733-1110

Info Phone: 612-733-1110

Cage: 04963

3M MINNESOTA MINING AND MFG CO ADHESIVES SEALERS DIV

SAINT PAUL, MN 55144-1000 US

Telephone: 800-364-3577/651-737-6501(24 HOURS)

Cage: 04963

EPOXY RESIN (EPICHLOROHYDRIN-BISPHENOL A)

Fraction By Weight: 42.0%

ACGIH TLV: N/D

N-BUTYL GLYCIDYL ETHER (BGE)

CAS: 2426-08-6

RTECS: TX4200000

Fraction By Weight: 7.0%

OSHA PEL 50 PPM

ACGIH TLV: 25 PPM; 9293

CALCIUM CARBONATE (MARBLE) (LIMESTONE)

CAS: 1317-65-3

RTECS: EV9580000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9192

TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

CLAY

Fraction By Weight: 51.0%

Effects of Overexposure:EYE:SEVERE IRRT. INH:IRRT.INGEST:LOW
TOXICITY.SKN:IRRT, SENSITIZATION POSSIBLE FOR SOME.(SEE PRECAU)

First Aid:EYE: FLUSH 10 MIN W/COPIOUS WATER, CALL PHYS. SKN: WASH
THOROUGHLY SOAP & WATER. INHL, INGEST: REMOVE TO FRESH AIR FROM
SOURCE OF DUST. WASH CONTAMINATED CLOTHING BEFORE REUSE

Extinguishing Media:CO*2, FOAM, DRY CHEMICAL, WATER
Fire Fighting Procedures:USE SCBA WHEN FIGHTING FIRES INVOLVING THIS
MATERIAL.
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:VENTILATE CONFINED AREAS. COLLECT SPILLAGE,
CLEAN UP RESIDUE, WIPE UP AREA, PLACE IN METAL CONTAINER

Handling and Storage Precautions:AVOID EYE, SKN CONTACT FROM CURING
VAPORS. AVOID EYE, INHL CONTACT W/DUSTS FROM GRINDING, CUTTING.
Other Precautions:BUTYL GLYCIDYL ETHER IS MUTAGENIC BY IN VITRO TESTS.
MUTAGENICITY STUDIES IN MICE GAVE MIXED RESULTS.WASH CONTAMINATED
CLOTHING BEFORE REUSE.

Ventilation:VENT CURING OVENS TO OUTDOORS. LOCAL, MECH VENTILATION
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health
PART B OF A TWO PART KIT.

HCC:N1
Spec Gravity:1.56
Viscosity:250/400000CPS
Solubility in Water:VERY SLIGHT
Appearance and Odor:WHITE PASTE-LITTLE ODOR
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:HCL, CO, CO*2, SMOKE PARTICLES

Waste Disposal Methods:CURED TWO-PART RESIN DISPOSABLE IN SANITARY
LANDFILL. INCINERATE UNCURED PASTE IN APPROVED INCINERATION
FACILITY IAW ALL APPLICABLE REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.